Names follow the SUEWS YAML specification; click one for its definition in the configuration reference.
thermal_layers.dz | [0.03, 0.12, 0.05] |
thermal_layers.k | [0.74, 0.93, 0.06] |
thermal_layers.rho_cp | [1900000, 1500000, 70000] |
Where: Title and abstract, city-centre and downtown wording, p. 1405
Where: Section 2.1, representative buildings and homogeneous urban sub-unit, p. 1407
Where: Section 2.1.2, downtown Łódź site and coordinates, p. 1409
Where: Table I, Lipowa DUD/BEB and Oke UCZ 2 classification, p. 1409
Where: Section 2.1.3, 500 by 500 m grid and source-area description, p. 1410
Where: Section 2.1.1, building dimensions, rooms, emissivity and heat-transfer coefficient, p. 1408
Where: Section 2.1.3, three roof, wall and internal layers, p. 1410
Where: Table III, roof thermal-layer properties, p. 1411
Table III gives the three roof layers used by the active record. The paper reports one heat-transfer coefficient of 1.2 W m-2 K-1, not the three stored legacy Internal_CH values of 0.001.
| Name | supported |
|---|---|
| Target | supported |
| Values | curation required The exported three-layer thickness, conductivity and volumetric heat-capacity values match Table III after converting MJ m-3 K-1 to J m-3 K-1. The source does not establish legacy Internal_albedo 0.2 or the three Internal_CH values of 0.001. issue #358 |
| Source | curation required Offerle et al. supports the active thermal-layer values and several legacy building attributes, but it does not support every value retained in the legacy mapping. issue #358 |
| Place | supported |
| Representativeness | supported The 500 by 500 m grid is approximately congruent with the unstable flux source area, supporting site rather than city-wide representativeness. |
| Urban Setting | supported The paper identifies the site as downtown and as a central European city centre. It does not identify the site as a central business district. |
| Method | supported |
| Identity | curation required The active thermal-layer identity is supported, but the record also retains legacy fields that cannot all be traced to this source. |
Offerle et al. conclusively supports city_centre and the active thermal-layer values. Human curation is still required for legacy Internal_albedo and the three Internal_CH fields, so this assessment is not eligible for sign-off.
Surf_thick4 | -999 |
Surf_k4 | -999 |
Surf_rhoCp4 | -999 |
Surf_thick5 | -999 |
Surf_k5 | -999 |
Surf_rhoCp5 | -999 |
Wall_thick1 | 0.1 |
Wall_k1 | 0.95 |
Wall_rhoCp1 | 1600000 |
Wall_thick2 | 0.1 |
Wall_k2 | 0.95 |
Wall_rhoCp2 | 1600000 |
Wall_thick3 | 0.1 |
Wall_k3 | 0.95 |
Wall_rhoCp3 | 1600000 |
Wall_thick4 | -999 |
Wall_k4 | -999 |
Wall_rhoCp4 | -999 |
Wall_thick5 | -999 |
Wall_k5 | -999 |
Wall_rhoCp5 | -999 |
Internal_thick1 | 0.05 |
Internal_k1 | 0.93 |
Internal_rhoCp1 | 1500000 |
Internal_thick2 | 0.05 |
Internal_k2 | 0.93 |
Internal_rhoCp2 | 1500000 |
Internal_thick3 | 0.05 |
Internal_k3 | 0.93 |
Internal_rhoCp3 | 1500000 |
Internal_thick4 | -999 |
Internal_k4 | -999 |
Internal_rhoCp4 | -999 |
Internal_thick5 | -999 |
Internal_k5 | -999 |
Internal_rhoCp5 | -999 |
nroom | 10 |
Internal_albedo | 0.2 |
Internal_emissivity | 1 |
Internal_CHwall | 0.001 |
Internal_CHroof | 0.001 |
Internal_CHbld | 0.001 |
Paste under land_cover.bldgs in a SUEWS YAML configuration; every value carries its citation.
thermal_layers:
dz:
value:
- 0.03
- 0.12
- 0.05
ref:
ID: offerle2005
DOI: 10.1002/joc.1198
desc: lodz, city_centre, site
k:
value:
- 0.74
- 0.93
- 0.06
ref:
ID: offerle2005
DOI: 10.1002/joc.1198
desc: lodz, city_centre, site
rho_cp:
value:
- 1900000
- 1500000
- 70000
ref:
ID: offerle2005
DOI: 10.1002/joc.1198
desc: lodz, city_centre, site